Sales: epoxy resin cast dry-type transformers with epoxy glue (potting compound) 9600GA/GB

Manufacturer: Wuxi HuiLong Electronic Materials Co., Ltd. Epoxy resin cast dry-type transformers with epoxy glue (potting compound) formulations of the principle of design: the use of epoxy resin WuxiHuiLong pouring 9600GA/9600GB In addition to the dry-type transformer with good mechanical properties, anti-short-circuit capacity, and insulation level high moisture-proof, fire-retardant, self-extinguishing,strong characteristics, but also has a low loss, low noise, small volume Bureau beautiful appearance and so on. Several dry-type transformer insulating materials commonly used to introduce and contrast the performance of dry-type transformer, one of the most critical technology is the choice of insulating materials, and their many varieties, a number of commonly used insulating materials, heat insulation and temperature levels as follows : Grade heat-resistant insulation material dielectric constant name εο volume resistivity (Ω / cm) Inorganic Materials C 3.0-5.0 Glass fiber C 5.0-6.0 A 4.5 General fiber paper

Epoxy resin cast dry-type power transformer

Polyester resins, Chatham A-F 3.1-3.2
A 3.1-drying polyester film state of 1 × 1010
SMC, DMC F 4.5-5.5 dry state of 1 × 1010
H dry ether modified state board 1 × 1010
Polyamines - N H 6 dry state board 1 × 1010
F 4.6 resin dry state of 1 × 1010
Heat insulation material with the highest level of the relationship between temperature heat insulation level AEBFHNC
Maximum working temperature (℃) 105 120 130 155 180 200 220

Licensing HuiLong epoxy resin cast dry-type transformers with epoxy glue (potting compound) 9600GA/9600GB performance of the products as follows:
Electrical equipment for high voltage control equipment (dry-type transformers, insulators) and so on, with excellent heat resistance, crack resistance, and heat conductivity, long-term insulation equipment.

Item	Unit	Determination of conditions		Physical properties
				9600GA+9600GB
				9600GBA	9600GBB	9600GYA	9600GYB
Appearance	－	25℃		Black liquid	Light yellow transparent liquid	Light yellow liquid	Light yellow transparent liquid
Density	g/cm3	25℃		1.78	1.20	2.01	1.20
Viscosity	Pa·s	25℃		－	0.05	－	0.07
A , B liquid ratio	－	质量比		100/20		100/17
The initial mixed viscosity	Pa·s	25℃		12.2		36
Can use the time (double viscosity)	℃/hrs	－		60/>1.5		40/>7
Curing conditions	℃/h	－		100/3+130/5		150/8
Glass transfer point	℃	DSC		108		105
Dielectric (insulation) Intensity	KV/mm	25℃		>25		>25
Permittivity	-	50Hz	25℃	3.76		3.90
			100℃	3.87		4.06
Dielectric loss	%	50Hz	25℃	0.81		0.40
			100℃	1.77		2.47
Volume resistivity	MΩ·m	DC500V	25℃	＞1×107		＞1×107
			100℃	＞1×106		＞1×106

Note: The above data 9600GA/9600GB characteristics of the typical data for customers reference and can not guarantee that a particular client under the conditions of the data measured with exactly the same.